How to clean car headlights?

How to clean car headlights — with toothpaste and sandpaper

Headlights are one of the most important bits on your car -special driving at night in the dark. We won’t able to drive without them.

Therefore, it’s important that you regularly clean them, as even a thin layer of grime can have a big impact on your headlights’ brightness.

Thankfully, cleaning your car’s headlights is a pretty straightforward job, and there are a number of solutions out there – even toothpaste can be used to remove any built-up layers of muck and dirt. Read on for everything you need to know about keeping your car’s headlights squeaky clean.

How can I keep my car headlight clean?

You can use some of the thing in below:

• I have headlight washers
• Using toothpaste
• Dedicated kits
• Using sandpaper
• Cola

Why do headlights need to be clean?

Keeping your car’s headlights as clean as possible is imperative from a safety perspective. The more dirt obscuring the light coming from your car’s headlights, the less effective they’ll be at illuminating the road ahead. Depending on how much grime is covering the lenses of your car’s headlights, it may also make it harder for oncoming traffic and other road users to see you. If the headlight are not clear can make a major safety hazard.

How to use the toothpaste to clear a car headlight?

Toothpaste: Turns out toothpaste is a bit of a cure-all. It can take clear away your toddler’s crayon masterpiece from your living room wall, water rings from your coffee table and scuffs from your shoes. And, it can help shine up your yellowed car headlights. Apply a little toothpaste to your headlights with a soft dry cloth and rub it in circular motions. Rinse with water and wipe with a wet cloth.

How to use the sandpaper to clean a headlight?

You’ll need a bit of a kit for this one – wet/dry 800-, 1,000- and 2,000-grit sandpaper pads, lubricant, cleaning polish and a wax sealant. Tape off the paint surrounding your car’s headlights to protect it from scratches. Douse the headlights covers and the 800-grit sandpaper pad with the lubricant, then scrub the headlight cover until you begin to see the yellow film begin to lift. Repeat using the 1,000-grit, then the 2,000-grit sandpaper pads. Wash your headlights with a cleaner like Rain-X, let it air dry, then buff it off. Do the same with a plastic polish, then a sealant.